Uncompromised Performance…
Unprecedented Value
Go to→

RSA5000 Series   |  Spectrum Analyzers

RSA5000
Engineers integrating WiFi, Bluetooth and other modern RF technologies are confronted with complex challenges like frequency hopping signals, channel conflict, and spectrum interference.  Real-Time Spectrum Analyzers bring the dimension of time to RF Analysis making it easier to monitor and characterize these complex RF systems.  The RSA5000 combines industry leading realtime performance (7.45µs 100% POI), rich data displays, and advanced triggering options allowing the user to quickly capture, identify and analyze these complex events. 
Experience the Power of Real-Time Spectrum Analysis. 
Capture, Identify, Isolate, and Analyze with the RSA Family
RSA5000 Datasheet & Specs Compare Rigol
Product Feature Customer Benefit
  DANL as low as -165 dBm with optional preamp View lower powered signals (harmonics, interference sources) and ease trouble-shooting in swept and real-time mode.
View lower powered signals (harmonics, interference sources) and ease trouble-shooting in swept and real-time mode.   Using the optional PreAmplifier the RSA5000 enables engineers to accurately view signals down to a noise floor of -165 dBm. In addition to locating and isolating lower power signals across the spectrum, this makes it possible to more precisely characterize all of the critical RF components within the transceiver design including attenuators, filters, mixers, and antennas
  1 Hz Minimum Resolution Bandwidth (RBW) Provides high resolution to separate signals with close frequencies enabling easier signal identification for characterization and advanced measurements.
Provides high resolution to separate signals with close frequencies enabling easier signal identification for characterization and advanced measurements.   Analyzing signals that are close together in frequency is critical to validation of many RF devices and systems. With the RSA5000, sweep a signal bandwidth with a RBW setting of just 1 Hz to view additional detail on close signals.
  1 ms full span sweep Utilize the fast 1 millisecond full span sweep to quickly identify signals of interest.
Utilize the fast 1 millisecond full span sweep to quickly identify signals of interest.   Quickly evaluating a broad spectrum for signals of interest and possible signs of interference or unwanted transmissions can be time consuming as many of these signals are moving to shorter and shorter durations. The RSA5000 makes a full span sweep in just 1 ms making it possible to capture many of these signals on the first pass and quickly get a more comprehensive understanding of the local transmissions before moving to real-time for additional analysis.
  Up to 40 MHz of Real-Time BW View wider band and hopping signals at one time without additional setup making identifying and analyzing signals of interest faster and easier.
View wider band and hopping signals at one time without additional setup making identifying and analyzing signals of interest faster and easier.   Engineers debugging time is a critical resource in any new design process. RF debugging is already a complicated challenge. Expanding the Real-Time bandwidth of the RSA5000 Series Analyzer to 40 MHz with the RSA5000-BW40 option makes it faster and easier to capture, isolate, and debug wider bandwidth signals with a single setup.
  7.45 µs 100% POI Capture pulsed transmissions as short as 7.45 µs with guaranteed capture and power accuracy.
Capture pulsed transmissions as short as 7.45 µs with guaranteed capture and power accuracy.   Probability of Intercept is an important specification for any serious Real-Time Spectrum Analyzer. It is the only way to know if your power measurements are accurate given a signal’s on time. Many Real-Time analyzers leave this value unspecified or make it dependent on the PC, but the RSA5000’s platform makes it possible to specify a 100% POI as low as 7.45 µs and to specify how that changes based on real-time span and RBW settings. Use these specifications to confidently capture and make power measurements of short duration transmissions.
  7 Real-Time Visualization Modes Advanced debugging and analysis with combinations of Normal, Density, Spectrogram, and Power vs Time visualizations.
Advanced debugging and analysis with combinations of Normal, Density, Spectrogram, and Power vs Time visualizations.   The 7 visualization modes of real-time signals using the RSA5000 make it easier to capture, isolate, and analyze RF signals and systems. Power versus Time and Spectrogram views show how the signal changes over time either within a capture or between consecutive captures. Normal and Density show power across the frequency span with either different trace and detector options or with probability of occurrence data. Combining these views and utilizing markers and triggers in different modes makes the RSA5000 a flexible instrument for real-time RF analysis and debugging.
  Powerful triggering capabilities Identify specific signals of interest with frequency mask, power triggers, or use external triggers to time correlate digital signals for additional analysis.
Identify specific signals of interest with frequency mask, power triggers, or use external triggers to time correlate digital signals for additional analysis.   Triggering flexibility is important to real-time debugging of RF signals. Time correlate events with embedded activity to test latencies and power draw effects or find root cause of unwanted transmissions or bugs. The RSA5000 combines powerful frequency mask and power triggers with trigger in and out signaling as well as an IF output that reproduces the real-time bandwidth on a 430 MHz carrier. All of these capabilities enable further time domain analysis of the spectrum with additional instruments already on the engineer’s bench.
  Tracking Generator and VSWR measurements Use the optional tracking generator to test cables, antennas, filters, and active components. VSWR automates standing wave parameter measurements.
Use the optional tracking generator to test cables, antennas, filters, and active components. VSWR automates standing wave parameter measurements.   The RSA5000-TG models come with the factory installed tracking generator and automated VSWR measurements included. The tracking generator provides 40 dB of dynamic range settable from -40 dBm to 0 dBm and can scan from 100 kHz to the maximum frequency of the instrument. Use this flexibility to verify devices under a variety of test conditions. VSWR measurements require a direction couple or bridge. We suggest adding the VB1040 or VB1080 accessories for VSWR measurements.
  Flexible usability options Use front panel buttons, touch screen, keyboard/mouse/monitor, and PC based software control in any combination to match the application and customer preference.
Use front panel buttons, touch screen, keyboard/mouse/monitor, and PC based software control in any combination to match the application and customer preference.   The RSA5000 makes it possible to control the instrument completely with a mouse, keyboard, and external HDMI monitor ideal for a bench at your desk. Engineers can also use the traditional knobs and controls. Those who prefer can interact with the touch screen directly. The flexibility to utilize and combine these capabilities makes it intuitive to operate the new instrument efficiently.
  EMI filters and detectors Standard 6 dB filters for EMI bandwidths as well as Quasi Peak detectors.
Standard 6 dB filters for EMI bandwidths as well as Quasi Peak detectors.   EMI PreCompliance testing and debugging is an important stage in any electronics design project. Use the EMI filters, bandwidths, and detectors to analyze frequencies of concern before sending the device out for testing. If emission levels are too high, easily switch to real time mode to further characterize the signal and determine root cause. Add S1210 EMI PreCompliance software for complete PC based EMI testing and add the near field probe set accessory (NFP-3) for debugging.

Product Details

RSA5000 with Callouts

Explore Real-Time

Experience the Power of Real-Time Spectrum Analysis
EXPLORE
Whitepapers
Keyless Entry System ASK/FSK AnalysisReal-Time vs. Swept Spectrum AnalyzersEMC Precompliance TestingIoT Antenna DebuggingDebug & Analysis of IoT Power RequirementsHardware for a simple MixerMixing RF SignalsEMC Precompliance: Conducted Emission TestingMeasuring Cable Loss with a Spectrum AnalyzerUsing probes with a Spectrum AnalyzerEMC Precompliance: Near Field Probes
Purchasing Info
Request Quote Find a Distributor
Technical Support

Search our Support Library

Look through our library of FAQs or ask a question on our support site.

 Contact Tech Support

Need Help Now?

Call +49-(0)89-8941895-0

Read about our 3 Year Warranty
Product Info
Compare Rigol with the competition  RSA5000 Datasheet & Specs

Specs

Please scroll to the sides when using small displays
Model FrequencyDANLPhase NoiseRBW Price (EUR)
RSA5032 3.2 GHz-165 dBm-108 dBc/Hz1 Hz €6,895
RSA5032-TG 3.2 GHz-165 dBm-108 dBc/Hz1 Hz €7,895
RSA5065 6.5 GHz-165 dBm-108 dBc/Hz1 Hz €8,595
RSA5065-TG 6.5 GHz-165 dBm-108 dBc/Hz1 Hz €9,595
 Interactive Selection Tool

To get started using your instruments over the bus download UltraSigma instrument communication software or for older instruments or customized installations review the How to Guide:
Using VISA and drivers to communicate with instruments

For help writing your own programs for our instruments review the programming manual or contact us directly.

Firmware

Drivers

Software

 UltraSigma Instrument Connectivity Driver UltraSpectrum S1210 EMI PreCompliance software UltraSigma Update for RSA How do I retrieve data using UltraSigma and a DSA? C#.NET basic instrument communication example User's Guide for UltraSigma Software How do I install UltraSigma? How do I install UltraSigma Compatible software?
Please scroll to the sides when using small displays
USB Cable

Instrument Cover

Instrument Quick Guide

Calibration Certificate

Power Cord

Please scroll to the sides when using small displays

Real Time BW

RSA5000-B40
40 MHz Real Time Bandwidth Option for the RSA5000 Series Real Time Spectrum Analyzers. RSA5000s come standard with 25 MHz Real Time Bandwidth. License code is emailed and user installed.

 

€1,295

Advanced Measurements

RSA5000-AMK
Advanced Measurement Kit Option for the RSA5000 Series Real Time Spectrum Analyzers. License code is emailed and user installed.

 

€495

PreAmplifier

RSA5000-PA
PreAmplifier Option for the RSA5000 Series Real Time Spectrum Analyzers. License code is emailed and user installed.

 

€355

Please scroll to the sides when using small displays

Spectrum Analyzer Software

Ultra Spectrum
Software for controlling and analyzing data from RIGOL spectrum analyzers.

 

€195

EMI Software

S1210 EMI Pre-compliance
EMI PreCompliance Software for RIGOL Spectrum Analyzers. Requires EMI option to be enabled on the instrument.

 

€469

Please scroll to the sides when using small displays

GPIB Adaptor

USB-GPIB
USB-GPIB Converter. Connect USB directly to instrument and control it via GPIB. This does not connect to a PC directly.

 

€319

Utility Kit

DSA Utility Kit
DSA Accessories Package including cables, adaptors, and antennas.

 

€655

VSWR Bridge

VB1040
800 MHz to 4 GHz VSWR Bridge with DSA8-VSWR software for DSA800 Spectrum Analyzers. *SW does NOT work with DSA1000 Family. Requires TG Option.

 

€795

VSWR Bridge

VB1032
VSWR Bridge with VSWR-DSA800, VSWR-DSA1000 licenses included. Requires TG Option. Frequency range: 1 MHz - 3.2 GHz, Typical Directivity: >= 25 dB

 

€555

VSWR Bridge

VB1080
VSWR Bridge and DSA800-VSWR software for Rigol Spectrum Analyzers. The VB1080's range is from 2-8 GHz. *SW does NOT work with DSA1000 Family. Requires TG Option.

 

€649

RF Adaptor Kit

RF Adaptor Kit
RF Cable and adaptor kit

 

€279

RF CATV Kit

RF CATV Kit
Kit Includes 50 to 75 Ohm Adaptors (2pcs)

 

€379

RF Attenuator Kit

RF Attenuator Kit
Kit Includes 6dB Attenuator (1pcs), 10dB Attenuator (2pcs)

 

€469

High Power Attenuator

ATT03301H
30dB High Power Attenuator, Max Power 100W

 

€209

N Type Cable

CB-NM-NM-75-L-12G
N(M)-N(M) RF Cable

 

€179

SMA Cable

CB-NM-SMAM-75-L-12G
N(M)-SMA(M) RF Cable

 

€179

Near Field Probe Kit

NFP-3
Near Field Probe Kit

 

€469

Rack Mount Kit

RM6041
Instrument Rack Mounting Kit

 

€255

High Accuracy Clock

OCXO-C08
High Stability Clock option for the RSA5000 series. Improves clock aging rate from <1 ppm/year to <0.03 ppm/year.

 

€695

We use cookies to personalise content and to analyse our web traffic.
Click the gear to the right to control the cookies used on this site. Click "OK" to confirm your chosen settings.
OK
Manage your cookies
Essential cookies are used to make the website function properly. A session cookie (PHPSESSID) is required to follow your progress through the website. It is essential to ensure that any information you enter including shopping cart additions, or routes you take are remembered by the website. Without this cookie, every page you visited would treat you as a completely new visitor. This cookie does not identify you personally and is not linked to any other information we store about you except in the case of purchasing items online. In this case it is only used if an error occurs and we are trying to help you process the order. The website cannot function properly without these cookies.
Statistic cookies help website owners to understand how visitors interact with websites by collecting and reporting information anonymously.
Google Analytics
Marketing cookies are used to track visitors across websites. The intention is to display ads that are relevant and engaging for the individual user and thereby more valuable for publishers and third party advertisers. We use a marketing automation toolkit (Act-On) that includes beacons or cookies to track individual activity through the site including downloads, page visits, and other behaviors. This data contains IP address information and may be connected to data from previous sessions or forms filled out including email, name, and additional information. This data is used for selling and marketing activities by RIGOL.
Acton Tracking Beacon